Waiting For The Next Available Co/Ip Line - LG-Ericsson iPECS LIP-8050V User Manual

To place an external call:

Lift the handset,

Dial the CO/IP line/group,

Dial the desired number.
5.2.2
801-820 for iPECS-50 & 100, 801-872 for iPECS-300 & 600, or
8001-8200 for iPECS-1200.
Any CO/IP Line access—
9
When dialing on a CO line which uses pulse style signals, you
may activate Dial Pulse to Tone Switchover changing to
DTMF style dialing (for banking services, etc.).
When placing an IP call, you must dial an IP address using the ‗*'
key in place of the dot.
If Least Cost Routing is set-up, the number you dial will be
analyzed and the system will place the call on the least
expensive route.
You may be assigned Dialing and/or CO/IP Line Access
Restrictions, in which case you will receive error tone if you
attempt to dial or access a restricted number/CO/IP line. CO/IP
line and Station Class Of Service (COS), which establish
dialing restrictions, may vary during Day and Night operation
(Day/Night COS).
You may need to enter an Authorization code before placing
calls, in which case you will receive a second dial tone.
Your external calls may be subject to Call Time Restrictions,
you will receive a Call Warning Tone prior to disconnect.
NOTE—In the event of an emergency, assigned Emergency
numbers (ex., a 911 call) may be dialed from any station in
the System, regardless of a Station's dialing restrictions
(COS).

Waiting for the next available CO/IP line

If all the lines connected to your system are busy, you will
receive an All Trunks Busy signal.
notified when a line is available for use.
You may request to be