LIP-8012D & LIP-8024D User Guide
To use the Speakerphone to answer or place a call:
•
Press
audio to the speaker and the microphone.
To control the volume of the Speakerphone or handset:
•
Press the ▼
To Mute the microphone:
•
Select the M
To turn off Mute (turn the microphone ON):
•
Press the M
To activate Group Listen while on an active handset call:
•
Press the
2.3
Using a Bluetooth Wireless Headset (LIP-8024D only)
To pair the wireless headset to the BTU:
•
Press the H
•
Dial 3,
•
Press the
To enable/disable the wireless headset:
•
Set the Bluetooth headset to pairing mode,
•
Press the
•
Dial *8,
•
Dial 1 (enable),
, the phone goes off-hook and sends
SPEAKER
▲ button.
VOLUME
button.
UTE
button.
UTE
button.
SPEAKER
The iPECS LIP-8024D may be equipped with a
Bluetooth Unit (BTU) allowing you to use a wireless
headset that supports Bluetooth version 2.0.
headset permits you to move freely around the phone
(within approximately 10 meters) and maintain a
conversation. Before using the headset, the headset
must be "paired" with the BTU, and then the headset
must be enabled for use. Operation of the iPECS LIP-
8024D with the headset is the same as with the
Speakerphone; press the Speaker button to activate the
BTU to go ON and OFF-hook.
NOTE—When in pairing mode, the phone and the
Bluetooth unit should be within 1 meter proximity.
button,
EADSET
button.
/
HOLD
SAVE
button,
/
TRANS
PGM
11
Issue 1
Using a
August, 2008