Ringer Off; Enabling Automatic Headset Operation - LG-Nortel IP8820 User Manual

Dial 2, or move the cursor to
o
softkey.
Dial the Line number plus one (2 for Line 1, 3 for Line 2,
o
etc.), or move the cursor to
Previous-Next
softkeys and press the
n
value of is the Line button number.
Dial 2, or move the cursor to
o
Previous-Next
the
Note the line number is shown in parenthesis after "Delayed
Ring Timer".
Using the dial pad enter the desired delay up to 10 seconds
o
in one-second increments, zero is no delay. The
backspace softkey will delete the previous character and
Clear
the softkey deletes the entire entry.
OK
Press the softkey to save your entry.
o
Move to another parameter with the navigation buttons and continue the session or press the
o
Setting ( ) button to exit the configuration session.

5.3. Ringer Off

The IP Phone can be programmed not to ring when an incoming call is received.
To set the Ringer Off parameter:
Press the Setting (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 3, or move the cursor to
o
softkey.
Yes
Press the softkey to enable Ringer Off, or press the
o
softkey to disable Ringer Off.
Move to another parameter with the navigation buttons and
o
continue the session or press the Setting (
exit the configuration session.

5.4. Enabling Automatic Headset Operation

Your IP8820 Phone supports use of a headset with a standard RJ-11 jack. In the Headset Auto Mode,
pressing a line button automatically connects audio to the headset. Also, redial, Speed dial, Speed
number dialing and click-to-call place calls with audio through the headset.
To enable Headset Auto Mode:
Press the Setting (
o
Dial 3, or move the cursor to
o
OK
softkey.
Dial 4, or move the cursor to
o
OK
the softkey.
Yes
Press the softkey to enable the Headset Auto Mode or
o
No
press the softkey to disable the Headset Auto Mode.
2.Ring Setting
n
Line Configuration
OK
2.Delayed Ring Timer
softkeys and press the
) button.
3.Phone Settings
3.Ringer Off
) button.
3.Phone Settings
4.Headset Auto Mode
IP8820 Broadworks IP Phone
Previous-Next
using the
Ring Setting
using the
>2.Line 1 Configuration
softkey. The
using
Line 1 Configuration
OK
softkey. .
>2.Delayed Ring Timer
Delayed Ring Timer (1)
0
Previous-Next
using the
Previous-Next
using the
No
Ringer Off
Current value is 'No'.
) button to
Previous-Next
using the
Previous-Next
using the
Headset Auto Mode
Current value is 'No'.
15
User Guide
softkeys and press the
Previous
Next
Previous Next
Clear
softkeys and press the
softkeys and press the
Yes
softkeys and press the
softkeys and press
Yes
OK
OK
OK
OK
OK
No
No
Dec. '08