HTC 6900 User Manual page 139

Connect to wireless networks
After Wi-Fi is turned on in Comm Manager, your device scans for available
wireless networks in your area.
To connect to a wireless network
1.
The network names of the
detected wireless networks
will be displayed on a pop-
up message window. Tap the
desired wireless network, then
tap OK.
2.
On the next pop-up message
window, tap The Internet if
the wireless network connects
your device to the Internet.
Otherwise, tap Work if the
wireless network connects your
device to a private network.
3.
If the wireless network is
secured by a network key, enter
this key, then tap Connect.
Next time you want to connect to the wireless network that you selected,
just turn on Wi-Fi in Comm Manager and you will automatically be
connected. You will not see the pop-up message windows again, and you
will not be prompted to enter the network key of the previously accessed
wireless network (unless you perform a hard reset which will erase custom
settings on your device).
Note Wi-Fi networks are self-discoverable, which means no additional steps are
required for your device to connect to a Wi-Fi network. It may be necessary
to provide a username and password for certain closed wireless networks.
Getting Connected 139