Toshiba A200 series User Manual page 162

A200
Problem
Character display
becomes garbled
during a communication
You cannot receive an
incoming call
DVD Super Multi drive supporting double layer disc recording
For more information, refer to Chapter 5,
Problem
You cannot access a
disc in the drive
10-14
Procedure
In data transmission, make sure the parity bit and
stop bit settings correspond with those of the
remote computer.
Check the flow control and communication
protocol.
Check the "rings before auto answer" setting in
your communications application.
If problems persist, contact your dealer.
About the HD
Procedure
Make sure the drive's drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If it is, wipe it with
a clean cloth dipped in water or a neutral cleaner.
See the Media care section in Chapter 4 for
details on cleaning.
DVD.
User's Manual