Connecting The Ac Adapter - Toshiba A200 series User Manual

A200

Connecting the AC adapter

Attach the AC adapter when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power. The AC adapter can be connected to any power source
supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the
AC adapter to charge the battery pack, refer to Chapter 7,
Power-Up
Use of the wrong adapter could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The output rating for the
computer is 19 volts DC.
1. Connect the power cord to the AC adapter.
2. Connect the DC output plug on the AC adapter to the DC IN input port
on the back of the computer.
3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.
To disconnect AC adaptor, you can follow the reversed procedure of
Connecting AC adaptor. Please hold the DC output plug portion by your
fingers and then plug it out when you disconnect the DC output plug.
3-2
Modes.
Connecting the power cord to the AC adapter
Connecting the adapter to the computer
Power and
User's Manual