Power-Up Modes; Panel Power Off/On; System Automatic Sleep/Hibernation - Toshiba A200 series User Manual

A200
To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3,
following message will appear in the LCD:
Enter Password [xxxxxxxx]
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the Password.
3. Press Enter.
If you enter the password incorrectly three consecutive times, the
computer shuts down. You must turn on the computer again and re-enter
the password.

Power-up modes

The computer has three power-up modes:
■
Hibernation (saves data in memory to the hard disk)
■
Sleep (power remains on, maintaining the data in memory, but the CPU
and all other devices effectively enter a 'sleep' mode)
■
Boot (does not save data in memory)
Refer also to the section Turning off the power in Chapter 3,
Started.

Panel power off/on

This feature makes the computer to enter Hibernation when the display
panel is closed and turns it back on when the display panel is opened.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.

System automatic Sleep/Hibernation

This feature automatically turns off the system in Sleep or Hibernation
mode if the computer is not used for a set duration.
Refer to
explanation of how to set the duration.
7-14
Special features, in Chapter 1,
Getting Started. The
A200 Series Features
Getting
for an
User's Manual