Using The Pc Settings - Toshiba 23PU200 series Owner's Manual

Using List mode
1
Press to access teletext.
100 TEXT M00
100 200
Green
Red
The four choices at the bottom of the screen are
now number — 100, 200, 300 and 400, which
have been programmed into the TV's memory.
2
To view these pages, use the coloured prompt
buttons.
e.g. press the Green button to view page 200.
3
If you want to change these stored pages, press
the coloured button for the colour you want to
change.
e.g. Press the Green button and enter the
3-digit number.
This number will change and blinking.
4
Press Q to store your choice. The bars at the
bottom of the screen will fl ash white.
5
You may view other pages by simply entering
the 3-digit page number — but NEVER press Q
or you will lose the favorite already stored.
Teletext buttons on the remote control
Below is an introduction to the teletext buttons on
your remote control and their functions.
To display a page of teletext:
Press to display teletext. Press again to
superimpose the teletext over a normal broadcast
picture. Press again to return to normal TV mode.
To display an index/initial page:
In Auto-mode
Press to access the index page. The one
displayed is dependant on the broadcaster.
In List-mode
Press to return to the 100 page or initial
page.
To reveal concealed text:
Some pages cover topics such as quizzes and jokes.
To discover the solutions, press
To hold a wanted page:
This function is included as it is part of the broadcast
teletext system but you will not need it as this TV
allows you to control the display of sub-pages.
14:58:55
300 400
Blue
Yellow
.
To enlarge the teletext display size:
Press once to enlarge the top half of the page,
press again to enlarge the bottom half of the page.
Press again to revert to the normal size.
To select a page while viewing a normal picture:
When in teletext mode, if a page selection is made
and then is pressed, a normal picture will be
displayed. The TV will indicate when the page is
present by displaying the title bar of the text page at
the top of the screen. Press
Note:
It will not be possible to change programme position
while in Teletext mode, you will have to cancel the
teletext fi rst by pressing
picture.
To select the time display:
If you press
broadcast, you will see a time display from the
broadcaster. It will remain on the screen for about 5
seconds.
9:56 and 25 seconds p.m.

Using the PC Settings

• First connect the PC and press
video input mode list appears on the screen, then
press  or  and Q in order to select the PC
input mode (- page 13).
• This function may not be available for some signal
or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
• Use the menus: SETUP and PC Settings
• Use the items: Horizontal Position and Vertical
Position
Adjusting the Clock Phase of the picture
If the Clock Phase, which synchronize the PC signal
and LCD display, is not optimized, the picture will
blur.
This function enables you to adjust Clock Phase
and display a clear picture.
• Use the menus: SETUP and PC Settings
• Use the item: Clock Phase
– 18 –
to view the page.
to return to a normal TV
while watching a normal TV
21:56:25
until the