Using The Pc Settings; Using The Media Player - Toshiba 50L2300 series Owner's Manual

9:56 and 25 seconds p.m.

Using the PC Settings

• First connect the PC and press o until the video
input mode list appears on the screen, then press
 or  and OK in order to select the PC input
mode (- page 12).
• This function may not be available for some signal
or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
Adjusting the picture position
• Use the menus: PREFERENCES, Display Settings
and PC Settings
• Use the items: Horizontal Position and Vertical
Position
Adjusting the Clock Phase of the picture
If the Clock Phase, which synchronize the PC signal
and LCD display, is not optimized, the picture will
blur.
This function enables you to adjust Clock Phase
and display a clear picture.
• Use the menus: PREFERENCES, Display Settings
and PC Settings
• Use the item: Clock Phase
Adjusting the Sampling Clock
If the Sampling Clock does not match with the dot
clock frequency of the PC, blurred picture detail will
occur, or screen width will change, or drift patterns
in vertical lines may be apparent.
This function enables you to adjust it and optimize
the picture.
• Use the menus: PREFERENCES, Display Settings
and PC Settings
• Use the item: Sampling Clock
Resetting the PC Settings
The Reset function adjusts the PC Settings to the
factory settings.
• Use the menus: PREFERENCES, Display Settings
and PC Settings
• Use the item: Reset (select Yes and press OK)
Note:
When a PC is connected using HDMI none of these
function will be available.

Using the Media Player

21:56:25
This TV allows you to enjoy movie, music and photo
fi les stored on a USB device connected to the USB
port.
Terminology
The TV can control and play content from a USB
device.
Notes:
• Do not insert/remove USB device while in use.
• MENU is not available during playback.
Media Player Specifi cations
Device
USB device
Interface version: USB2.0 HS
USB Mass Storage Class devices (MSC)
Notes:
• Connectivity is not guaranteed for all devices.
• Incorrect behaviour may occur with a USB hub
• Turn off the TV before connecting a USB HDD
• The Auto Format function is not available.
• The aspect ratio may not be correct in some cases.
File system: FAT16 and FAT32
You must obtain any required permission
from copyright owners to download or use
copyrighted content. TOSHIBA cannot and does
not grant such permission.
Basic operation
Using Media Player
When Auto Start is enabled, you will be asked if
you want to start the Media Player whenever a USB
device is inserted. If Auto Start is disabled, you must
manually start the Media Player from the menu.
To change the Auto Start setting:
1
2
3
– 19 –
connection.
devices.
From the APPLICATIONS menu, press  or 
to select Media Player and press OK.
Press  or  to select Setup and press OK.
Press  or  to select Auto Start and press 
or  to select On or Off .