Yamaha CDR-HD1500 Quick Start Manual page 27

Setting the CD-R recording mode
■
You can select one of the following three modes:
All Synchro: copies all tracks to CD-R by synchronizing with the song
playback on the source HDD.
Full Auto: in addition to the operation done in Auto Synchro,
automatically finalizes the CD.
Multi Synchro*: copies only specified tracks to CD by synchronizing
with the song playback.
Select All Synchro, here.
1. Press the MODE button
2. Press the Up/Down buttons
3. Press the ENTER button
*
You can designate the number of tracks with Multi Synchro mode.
4
Press the Up/Down buttons
Bookmark group you want to copy to CD.
5
Press the Playback button
The display shows the progress of the copy process.
"Wait" will momentarily appear in the display, and then the copy
operation will finish.
6
You can add more tracks by repeating steps 2-5 above, and
complete your CD.
7
(Set the CD you want to finalize in the disc tray, and) press
the FINALIZE button
"Finalize OK?" appears in the display.
8
Press the Playback button
"Finalizing" appears in the display and finalization is engaged.
When finalization is complete, the TOC mark appears in the display.
You can now play the CD on other CD players.
during CD-R copy standby mode.
4
to display All Synchro.
5
to select the mode.
6
to select the Disc, Album or
5
to start recording.
8
.
3
to start finalization.
8
NOTE NOTE
You can select other options when You can select other options when
recording a CD, such as digital/ recording a CD, such as digital/
analog copy methods, copy volume analog copy methods, copy volume
level, and its copy speed. Getting level, and its copy speed. Getting
the message "Can't Copy" when the message "Can't Copy" when
you try to copy digitally recorded you try to copy digitally recorded
data indicates that the data is data indicates that the data is
protected and cannot be copied protected and cannot be copied
digitally according to SCMS digitally according to SCMS
standards. In this case, you need to standards. In this case, you need to
change the copy method. change the copy method.
For information on SCMS, see For information on SCMS, see
page 32. page 32.
NOTE NOTE
Depending on CD condition, Depending on CD condition,
"Wait" may appear, indicating that "Wait" may appear, indicating that
the OPC* adjust function is active. the OPC* adjust function is active.
This takes about 10 seconds. This takes about 10 seconds.
* * Optimum Power Control Optimum Power Control
NOTE NOTE
In step In step 5 5 , you cannot play back , you cannot play back
the recorded CD on another CD the recorded CD on another CD
player. To make the disc playable player. To make the disc playable
on other CD players, proceed to on other CD players, proceed to
step step 6 6 to finalize the CD. to finalize the CD.
NOTE NOTE
Track(s) can only be recorded Track(s) can only be recorded
to CD as a group. If you want to CD as a group. If you want
to record several tracks, use the to record several tracks, use the
Bookmark function to bunch tracks Bookmark function to bunch tracks
together to form a group, which together to form a group, which
you can then record. you can then record.
NOTE NOTE
If you select the Full Auto copy If you select the Full Auto copy
mode, the CD will automatically mode, the CD will automatically
be finalized after recording. You be finalized after recording. You
cannot add further tracks to a cannot add further tracks to a
finalized CD. finalized CD.