Yamaha CDR-HD1500 Quick Start Manual page 14

NOTE NOTE
When using a phono equalizer, When using a phono equalizer,
make sure that the power of the make sure that the power of the
phono equalizer is turned on. phono equalizer is turned on.
NOTE NOTE
To avoid a long pause at the To avoid a long pause at the
beginning of the recording, press beginning of the recording, press
the Playback button after the the Playback button after the
turntable needle has securely turntable needle has securely
landed on the LP. landed on the LP.
NOTE NOTE
You can show the Track/Disc You can show the Track/Disc
information such as song length in information such as song length in
the display. For more information, the display. For more information,
see page 10. see page 10.
NOTE NOTE
Music such as classical may be Music such as classical may be
problematic since a pianissimo problematic since a pianissimo
section may be recognized as the section may be recognized as the
beginning of the next song. Other beginning of the next song. Other
sections, for the opposite reason, sections, for the opposite reason,
may not receive track markers may not receive track markers
correctly. You can adjust the correctly. You can adjust the
settings of Synchro Setup should settings of Synchro Setup should
you experience difficulty with you experience difficulty with
automatic detection. If two tracks automatic detection. If two tracks
are recognized as a single track, or are recognized as a single track, or
if a single track is recognized as if a single track is recognized as
more than one, you can change this more than one, you can change this
later by editing, which is explained later by editing, which is explained
from page 16. from page 16.
1
Recording Mode
All Synchro
Auto Period* 2
*
1 You can specify the number of songs you want to record with Multi Synchro.
* You can place track markers at a designated time interval with Auto Period.
2
The mode will return to Track Synchro even if you select other
modes in the previous setting.
7
Play the LP on the external device (turntable).
8
Press the Playback button
Detecting Track Markers
■
It may be difficult to automatically detect track marker points depending
on the sound source. In this case, you can place the track markers
manually. Press the TRACK NO. WRITE button on the Remote Control
at the desired point.
Track marker detection is determined by signal (and its sensitivity
setting) from the sound source. You can change the conditions of track
marker detection to optimize automatic detection.
Ex.
• Analog TH Level: -40dB
• Int.Time (Interval Time): 2.5 sec. (range: 0.5–5.0 sec.)
-20dB
Available
song
-40dB
Range
-60dB
A track marker will be placed at point 1 .
For more information, see page 36 in the Owner's Manual. If you change
the automatic detection setting, you may get track markers at unexpected
points.
Start/Stop Recording
Track Marker
Track markers will automatically
Auto
be placed between songs according
to song playback. All songs will
Auto
automatically be recorded.
Track markers will automatically be
Manual
placed at a designated time interval.
Recording will automatically be done
Auto
for the designated duration.
to start recording.
9
Track Marker
1
1st 2nd
song
longer than 2.5 sec
Description
Silent
Portion