Yamaha CDR-HD1500 Quick Start Manual page 26

1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
NOTE NOTE
Pressing the Stop button Pressing the Stop button
7 7
step aborts the operation and exits step aborts the operation and exits
the copy standby mode. the copy standby mode.
NOTE NOTE
By using A.M.Q.R., Actual By using A.M.Q.R., Actual
recordable time will be shorter recordable time will be shorter
than that printed on the CD- than that printed on the CD-
R/RWs. Recordable time is R/RWs. Recordable time is
approximately 63 minutes on a approximately 63 minutes on a
74-minute CD, and 68 minutes on 74-minute CD, and 68 minutes on
an 80-minute CD. This is because an 80-minute CD. This is because
meta-information like TOC (table meta-information like TOC (table
of contents) is also recorded. of contents) is also recorded.

CD-R and CD-RW Discs
■
There are several major differences between a CD-R and CD-RW.
• Copy (Writing): You cannot record (overwrite) on the recorded part of
a CD-R. You can record on a CD-RW over and over again.
• Playback: A CD-R can be played back on any CD player.
A CD-RW can only be played on a CD-RW-compatible player, such as
the CDR-HD1500.
Unfinalized*
Unfinalized CD-RW
Finalized CD-R
Finalized CD-RW
* For information on "Finalization," see page 28.
1
*
2 You need to erase the TOC (table of contents) on a CD-RW to make it rewritable. For
information on TOC erasure, see page 48 in the Owner's Manual.
2
Press the COPY button
"REC" lights up in the display, and the HDD mark starts blinking.
CD-R copy standby mode is now engaged.
The first press of the COPY button
the internal CD-R, and the second press will select CD-R recording
from HDD.
About Audio Master Quality Recording (A.M.Q.R.)
■
in this in this
Audio Master Quality Recording is a high quality recording mode used
to create an audio CD in the quality of the original. By minimizing the
jitter that subtly degrades audio quality during playback, Audio Master
Quality Recording achieves sound close to the original source. Set
A.M.Q.R. by pressing the A.M.Q.R. button
mode. The A.M.Q.R mark indicator appears in the display.
If you use the A.M.Q.R. function, the original data on the HDD will
disappear from the HDD and "move" onto the CD-R. This is called
"Digital Move."
3
If necessary, set the CD-R recording mode.
Overwrite
CD-RW incompatible
CD-R No
1
Yes
No
Yes*
2
twice.
1
1
Playback
CD-RW compatible
player player
No No
No No
Yes Yes
No Yes
selects HDD recording from
in CD-R copy standby
2