How To - Gateway FPD2185W User Manual

Using Your Gateway Flat Panel Monitor

How To

24
How do I make the image rotate when the screen is rotated?
Make sure that EzTune is installed on your computer. An EzTune software
CD shipped with the monitor. When using a VGA or DVI input connection
with EzTune installed, the image automatically rotates when the screen is
rotated. Other inputs and the on-screen display (OSD) do not rotate into
portrait mode.
Setup
When I rotate my screen 90 degrees, why does the image not
automatically rotate?
For auto rotation to work, EzTune software must be installed. Place the
EzTune CD in your computer's CD or DVD drive and then follow the
on-screen instructions. After your computer restarts, auto rotation will
work.
Why does the image looks stretched or fuzzy when I connect the monitor
to my computer?
You must adjust the operating system's display settings to match the
monitor's optimal (native)1680 × 1050 setting. For information on
adjusting settings in Windows XP, see "Adjusting the screen resolution" on
page 16.
The easiest way to adjust your screen resolution is to use the included
EzTune software. After installing EzTune, click the EzTune icon in the
taskbar, click the Adjust tab, click Resolution, then click Preferred. Your
screen adjusts to 1680 × 1050, and EzTune displays a message that you
are at a preferred resolution.
I do not see 1680 × 1050 available in the Windows display control panel
and EzTune does not adjust my resolution to the preferred setting.
Make sure that your video card can display at 1680 × 1050 resolution.
■
This may be caused by older video drivers on your computer. See the
■
Gateway support Web site (support.gateway.com) for updated video
drivers for your computer. You can also go directly to your video card's
support Web site for the most up-to-date video drivers. The Web sites for
the major video card manufacturers are:
ATI: http://www.ati.com
Intel: http://www.intel.com
Nvidia: http://www.nvidia.com
When I connect the monitor's USB hub to my computer, I see an error
message saying that my USB hub may not be running at full speed.
This can happen if you connected the monitor's high-speed USB 2.0 hub
to a low-speed USB 1.1 hub or a USB 1.1 port on your computer. To use
the monitor's high-speed USB 2.0 capabilities, you must connect the
monitor to a USB 2.0 port on your computer.
www.gateway.com