Gateway FPD2185W User Manual page 17

www.gateway.com
OSD Menu Description
Video Adjust Unless otherwise indicated, these settings apply only to SD (standard definition) video at 480i and below. Where "PC input"
menu is indicated, the resolutions that apply are from 800 × 600 to 1680 × 1050.
source.
sets resolution aspect ratios and scaling between Wide, Zoom and 1:1.
Wide mode
Widescreen (1.76:1) images fill the entire screen without distortion, while widescreen (1.85:1
and 2.35:1) images appear without distortion but with black bars at the top and bottom.
PC input: Stretches the image to fit the entire screen.
Zoom mode
a distortion-free and black bar-free image. PC input: Zooms the image to fill the screen from
top to bottom with black bars on the left and right sides of the image.
1:1 mode
appears with black bars on the left and right of the image. PC input: Preserves the original aspect
ratio of the resolution by using black bars on the left and right sides and variable sizes of black bars
on the top and bottom of the image (depends on resolution).
Panoramic mode
image to fill the entire screen. Unlike Wide mode, Panoramic mode stretches only the left and
right sides of the image, and leaves the center of the image distortion free.
Correction—Film Mode Detection detects frame rates of the source image and adapts the frame rate of the display for
ultimate image quality. Bad Edit Detection and Correction corrects incorrectly synchronized video.
DCDi by Faroudja—Directional Correlation De-interlacing reduces jagged edge artifacts on diagonal lines.
Cross Color Reduction—Reduces cross-color artifacts, such as unintentional flashing colors or rainbow patterns, that result
from composite video signals.
MADI—Motion-Adaptive De-Interlacing ensures a more static (flicker-free) display image for image sections not containing
moving elements, and ensures smoother edges for moving elements.
Geometry
menu
and horizontal position automatically.
and horizontal position automatically.
change.
Sharpness—Adjusts sharpness for video images.
Noise Reduction—Uses noise reduction filters that adapt to the amount of noise and motion from the video
Video Scaling—Sets video aspect ratios and scaling between Wide, Zoom, 1:1, and Panoramic modes. PC input:
stretches a standard broadcast or full-frame image to fill the entire screen.
crops off a portion of a widescreen image in order to fill the entire screen with
preserves the movie's original aspect ratio, so a standard broadcast or full-frame movie
uses selective distortion to stretch a standard broadcast or full-frame
Film Mode Detection with Bad Edit Detection and
Auto Video Enhance—Enables DCDi, Cross Color Reduction, and MADI for optimized video performance.
H-Position—Moves the display image left and right. You can also press the Auto button to configure the vertical
V-Position—Moves the display image up and down. You can also press the Auto button to configure the vertical
Clock—Minimizes any vertical bars or stripes visible on the screen background. The horizontal screen size will also
Phase—Minimizes any horizontal distortion and clears or sharpens the displayed characters.
Adjusting monitor settings
13