Chapter 6 Trouble Shooting
•
Configure your wireless device with the same SSID, encryption type, and encryption key as used
for your AirStation.
The following are the factory default settings of the AirStation:
SSID -
Encryption Method -
Encryption Key - Printed on the label of the AirStation (if not, the AirStation is not
•
Place your AirStation and wireless devices 2 - 10 feet apart.
•
Restart your AirStation.
You forgot AirStation's SSID, Encryption Key, or
Password.
Hold down the RESET button (page 99) on your AirStation for 5 seconds to initialize its settings. All
settings, including your password, SSID, and encryption key will be initialized to their defaults.
The followings are the factory default settings of the AirStation.
SSID -
Encryption Method -
Encryption Key -
The link speed is slower than 300/150 Mbps
(Maximum link speed is only 130/65Mbps).
By default, the AirStation's 300/150 Mbps mode is not enabled. To enable it, use the following
procedure:
1. Open the configuration screen of your AirStation (page 18).
WHR-HP-GN / WHR-HP-G300N User Manual
Printed on the label of the AirStation
WPA/WPA2 mixedmode-PSK(*)
* Connect to the network using a wireless connection with WPA-PSK
TKIP or WPA2-PSK AES. WPA2-PSK AES is most recommended.
encrypted in default configuration.)
Printed on the label of the AirStation
WPA/WPA2 mixedmode-PSK(*)
* Connect to the network using a wireless connection with WPA-PSK
TKIP or WPA2-PSK AES. WPA2-PSK AES is most recommended.
Printed on the label of the AirStation (if not, the AirStation is not
encrypted in default configuration.)
85