TRENDnet 1310nm Datasheet

FEATURES
Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards
!
1 x 10/100Base-TX auto-negotiation RJ-45 port
!
Auto MDIX for 10/100Base-TX port and one 100Mbps bi-directional single-mode fiber port with simplex SC-type connector
!
Provides Dip switch to set: Ethernet (Forced / Auto-Negotiation), Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
!
Status LED indicators for Power, Link/Activity, Full-Duplex, Link Fail, and Speed
!
Support LLCF (Link Loss Carry Forward, Link Pass Through)
!
Supports LLR (Link Loss Return) for FX Port
!
Dip-switch for full and half duplex selection on fiber port
!
Wall mountable
!
Optional 19" system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
!
3-year limited warranty
!
TEW-503PI (07-28-2005)
10/100Mbps TX to 100Base-FX Dual-
Wavelength Single-Mode Fiber Converter
TFC-110S40D3/D5
TFC-110S40D3 or TFC-110S40D5 Bi-Directional Single-Fiber
Media Converter transforms 10/100Base-TX UTP/STP media to
100Base-FX media and vice versa. The 10/100Base-TX Port Auto-
Negotiating 10 or 100Mbps connection speed with Auto-MDIX
media type, the fiber supports single-mode SC type connection.
This converter will give your Switch/Hub the ability to interface with
fiber connection over a distance up to 40 km.
fiber
TFC-110S40D3/D5
rev: 11. 1 4.2008