Table of Contents
Advertisement
Unpacking the Scanner
Follow these instructions for unpacking the scanner. The packing
arrangement is illustrated in the figure below.
Left and Right
Packaging Foam
Front Packaging Foam
1. Open the box.
2. Lift up and remove the left, right, and front packaging foam.
3. Lift up and remove the shipaway kit packaging.
4. Reach under the scanner, lift it out of the box and place it in the
location you have prepared for it.
WARNING!
The scanner weighs approximately 55 lb. Two people must be
available to lift the scanner from the box.
5. Place all of the packaging foam back in the box and save it for use in
case you have to ship the scanner to another location.
1-2
Unpacking and Setup
Shipaway Kit
Packaging
Bottom
Packaging Foam
Advertisement
Table of Contents
