Precautions - Hitachi SCI Getting Started Manual

Scancenter 50/62 ppm printer
Table of Contents

Advertisement

Precautions

Read all of these instructions and keep them for later use.
Follow all warnings and instructions marked on the device.
Unplug this device from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Do not use this device near water.
Do not place this device on an unstable cart, stand, or table. The
device could fall and suffer serious damage.
Slots and openings in the cabinet and the back or bottom are provided
for ventilation. To ensure reliable operation of the device and protect
it from overheating, these openings must not be blocked or covered.
The openings should never be blocked by placing the device on a
bed, sofa, rug, or other similar surface. This device should never be
placed near or over a radiator or heat register. This device should not
be placed in a built-in installation unless proper ventilation is pro-
vided.
This device should be operated from the type of power source indi-
cated on the marking label. If you are not sure of the type of power
available, contact your dealer or local power company.
This product is equipped with a 3-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only fit into a ground-
ing-type outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your outlet. Do
not defeat the purpose of the grounding-type plug by removing its
grounding pin. (This does not apply in countries in which a 2-wire,
non-grounded type of plug is used.)
Do not place this device where the cord will be walked on.
If an extension cord is used with this product, make sure that the total
of the ampere ratings on the devices plugged into the extension cord
does not exceed the extension cord ampere rating. Also, make sure
that the total of all devices plugged into the wall outlet does not
exceed 15 amperes.
A-4
Safety Information

Advertisement

Table of Contents
loading

This manual is also suitable for:

ScancenterSc1

Table of Contents