Features - Oreck Air Purifier User Manual

Features

6
5
4
7
1. All-in-one Pre-Filter / HEPA Filter: Pre-Filters large particles
such as dust, hair and lint. HEPA Filter provides broad
protection by removing up to 99.97% of airborne particles
0.3 microns in diameter and above for a healthier, cleaner
home environment.
. UV-C/ION: This button activates both the UV-C light
technology and the Air Revitalizer features. Both are
designed to run continuously, but may be turned OFF
if desired. The Air Revitalizer provides additional air
freshness via the release of negative ions, which can also
cause dust particles to clump together and fall out of the air
passing through the air purifier. You may notice faster dust
buildup on the unit and surrounding objects with the Air
Revitalizer turned ON.
3. Intake Grille: Where air enters the unit. This is the first
stage of cleaning.
4. Power: Turns the unit OFF and ON
5. Speed: Fan Speed, unit begins at medium speed. Fan
speed is indicated by the three LED's. LED I - low, LED II
– medium, and LED III - high.
• Low for the quietest operation, cleaning the air as
effectively but more slowly than the high setting
• Medium for normal use
• High for maximum cleaning
6. Timer: Sets the run time before automatically turning OFF.
7. Exhaust Grille: Directs the flow of air as it exits the unit.
8. Remote Control: Remotely turns the Power ON/OFF,
adjusts the UV-C light technology and Air Revitalizer
features, Motor Speed and Timer.
9. Odor Absorbing Filter: Reduces odors and chemical fumes
from glue, solvents and synthetic materials.
2
9
6
1
3
8