Maintenance; Replacing The Hepa Air Filter; Accessories - Oreck Air Purifier User Manual

Maintenance

Accessories

Replacing the HEPA Filter
2
3
1. Unplug the air purifier.
. Press down on the Intake Grille tab to release.
3. Remove the Intake Grille.
4. Pull the tabs located on the bottom portion of the All-in-one
Pre-Filter / HEPA Filter to remove. Discard old filter.
5. Pull the tabs located on the bottom portion of the Odor
Absorber Filter. Vacuum as needed. DO NOT DISCARD.
6. Insert top of clean Odor Absorber Filter into the Odor
Absorber Filter cavity and then slide in the bottom.
7. Insert top of the new All-in-one Pre-Filter / HEPA Filter into
the All-in-one Pre-Filter / HEPA Filter Cavity and then slide
in the bottom.
8. Insert bottom of the Intake Grille and rotate it towards the
unit. Push on the upper and middle section of the filter cover
to snap in place.
HEPA filter, 3 pack
8
7
8
Part
6
5
4
Number
AIRHEPA3PK2