Sony Handycam HDR-GW66E Operating Manual page 16

4
For customers in the USA and
Canada:
Connect the AC Adaptor (AC-
UD11, ) and the USB cable ()
to your camcorder and the wall
outlet (wall socket).
For customers in countries/
regions other than the USA and
Canada:
Connect the AC Adaptor (AC-
UD10, ), the power cord (mains
lead) () and the USB cable ()
to your camcorder and the wall
outlet (wall socket).
The CHG (charge) lamp turns on.

The CHG (charge) lamp turns off when the

battery pack is fully charged. Disconnect
the USB cable from the Multi/Micro USB
Terminal of your camcorder.
5
Close the battery/memory card/
jack cover.
Flip the battery/memory card/jack cover

back (), then slide () and close the cover
firmly until the yellow mark of the cover lock
lever is hidden.
Notes
You cannot insert any battery pack other than an NP-BX1 (supplied) into your camcorder.

You cannot use a Sony CP-AH2R, CP-AL, or AC-UP100 portable power supply device (sold separately)

to charge the camcorder.
In the default setting, the LCD screen turns dark if you do not operate the camcorder for about 1 minute,

and the power turns off if you do not operate the camcorder for 2 minutes, to save battery power ([Power
Save] p. 49).
GB
1
CHG
(charge)
lamp
To the wall outlet (wall
socket)

USB plug
(big)

To the wall outlet (wall socket)
USB plug
(small)

