Table of Contents
Advertisement
Available languages
Available languages
Air Hose Replacement
The air hose attached to your compressor has an
integral pressure adjusting valve at the working end of
the hose. Should service or replacement be required,
make sure that the pressure adjusting valve is present
in the air hose line.
1. Set the On/Off switch to "OFF" and unplug the
cord.
2. Relieve all pressure from the air compressor head
and air hose by turning the adjustable pressure
valve to 10 PSI.
SERVICE AND ADJUSTMENTS
STORAGE
not equipped with the pressure adjusting
valve. The appropriate hose assembly for
your compressor is available at Sears.
pinched at any time. This is important to
avoid damage to your compressor and to
maintain pressure adjusting valve control.
3. Protect the electrical cord and air hose from dam-
age by winding them loosely around the air com-
pressor.
4. Store the air compressor in a clean and dry loca-
tion.
11 - ENG
DO NOT replace the hose
with standard hose that is
Do not allow hose to
become kinked or
A08593
Advertisement
Chapters
Table of Contents
