10
"MAC Address"
13
"Firmware Server IP Address"
14
"Configuration
Address"
15
"Upgrade Protocol"
16
"Firmware Version"
17
"Firmware Upgrade"
47
"Direct IP Calling"
86
"Voice Mail"
99
"RESET"
"Invalid Entry"
Others
CONFIGURATION VIA WEB BROWSER
The GXP1100/GXP1105 embedded Web server responds to HTTP/HTTPS GET/POST requests.
Embedded HTML pages allow a user to configure the IP phone through a Web browser such as Microsoft's
IE, Mozilla Firefox and Google Chrome.
To access the GXP1100/GXP1105 Web GUI:
1. Connect the computer to the same network as the phone;
2. Make sure the phone is turned on and wait until the indicator on the top right corner turns from RED to
OFF;
3. Take the handset off hook. Enter *** and then press 02 to hear the IP address;
FIRMWARE VERSION 1.0.4.23
•
G-723
•
G-729
Announces the MAC address of the unit.
Announces current Firmware Server IP address. Enter
12 digit new IP address.
Server
IP
Announces current Config Server Path IP address.
Enter 12 digit new IP address.
Upgrade Protocol for firmware and configuration update.
Enter 9 to toggle between HTTP, TFTP and HTTPS.
Firmware version information.
Firmware upgrade mode. Enter 9 to toggle among the
following three options:
•
always check
•
check when pre/suffix changes
•
never upgrade
Enter the target IP address to make a direct IP call, after
dial tone. (See Make a Direct IP Call section)
Announces number of voice mails.
Enter MAC address to restore factory default setting.
(See Restore Factory Default Setting section)
Press 9 to reboot the device.
Automatically returns to Main Menu.
GXP1100/GXP1105 USER MANUAL
Page 23 of 46