GETTING FAMILAR WITH THE KEYPAD
The following table describes the buttons used on the GXP1100/GXP1105 keypad.
Hold. Place active call on hold, or resume the call on hold.
Flash. Flash key can be used for multiple purposes.
•
•
Transfer. Transfer an active call to another number.
Message. Retrieve voicemail messages.
Programmable hard key. It can be configured for multiple purposes: Speed dial,
Dial DTMF, VMsg, Call Return, 3-way Conference, Transfer, Intercom.
Mute. Press to mute/unmute an active call.
Send. It can be used as Send or Redial.
•
•
Volume. Press "-" or "+" to adjust the volume.
Standard phone keypad.
0 - 9, *, #
FIRMWARE VERSION 1.0.4.23
USING THE GXP1100/GXP1105
Table 4: GXP1100/GXP1105 KEYPAD DEFINITIONS
Call waiting. Bring up a new line; or answer the second incoming call.
3-way Conference. Establish 3-way conference when FLASH key is configured
as CONF. Before using the Flash key for 3-way conference, "Enable Flash key as
CONF" option has to be set to "Yes" under web GUI->Advanced Settings.
Send. Enter the digits and then press Send to dial out the number.
Redial. Redial when there is a previously dialed call.
GXP1100/GXP1105 USER MANUAL
Page 12 of 46