Kenwood TK-5210 Instruction Manual page 35

4 Press the D> key to toggle the selected channel
between Priority and Normal.
• "P", "P2", or "PP" appears on the display when Priority
mode is selected.
5 Press the A key again to set the new channel setting.
6 Press the Side 1 key to exit scan programming.
■ Conventional Operation (Single Zone/ Multi-Zone)
If Scan Type has been programmed for Conventional
Single Zone or Conventional Multi-Zone operation, you are
able to reprogram the Priority mode.
1 Press the key programmed as Scan Program.
• The
2 Press the Side 2 and Side 3 keys to select the channel
you will set as the Priority channel.
3 Press the <C and D> keys to select your desired zone.
4 Press the D> key to toggle the selected channel
between Priority and Normal.
• "P", "P2", or "PP" appears on the display when Priority
mode is selected.
5 Press the A key again to set the new channel setting
and exit scan programming.
To exit without saving, press the Side 1 key.
•
icon appears on the display and blinks.
27