Using An External Effect; Monitor Speakers - Yamaha EMX660 Owner's Manual

16
Example setups
Sending an independent mix to the

monitor speakers

1
Set the MONITOR section MASTER con-
trol to the √ √ √ √ position.
2
Raise the MONI controls for the channels
that you wish to hear from the monitor
speakers.
Note: The MONI controls are not affected by
the level settings of each channel. This allows
you to create a mix that is independent of the
MAIN section.
3
Use the graphic equalizers and MASTER
controls of the MAIN/MONITOR sections
to adjust the overall volume and tone.
EMX660—Owner's Manual

Using an external effect

1
Raise the EFFECT controls for the channels
to which you want the external effect to
be applied.
2
Adjust the input level of the external
effect so that the sound is not distorted at
the input of the external effect.
3
Use the MAIN section AUX IN control to
adjust the level of the sound processed by
the effect.