Advertisement
1. Remove batteries from the pushbutton by opening the case as shown below.
2. Locate the pushbutton jumpers shown below.
Push Button Jumpers
3. Jumpers 1-6 are used to select 1 of 64 possible home security codes.
4. To change the house code, add or remove jumpers as needed. After matching
the existing security code, test the system for proper operation. Positions 1-6 on
the chime and pushbutton must match exactly.
Push Button Mounting Instructions
Note:
Avoid mounting the push button on metal surfaces, as it may result in a
reduced range of transmission. Do not mount in an area of rain (direct weather.)
a. Removing the back cover
Advertisement
