Connecting The Ac Adaptor - Toshiba Satellite P30 User Manual

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from battery
power. The AC adaptor can be connected to any power source supplying
from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor
to charge the battery pack, refer to Chapter 6,
Use of the wrong adaptor could damage your computer. TOSHIBA assumes
no liability for any damage in such case. The output rating for the computer
is 19 volts DC.
1. Connect the power cord to the AC adaptor.
2. Connect the AC adaptor to the DC output plug to the DC IN input port
on the back of the computer.
3. Plug the power cord into alive wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.
Satellite P30
Figure 3-2 Connecting the power cord to the AC adaptor
Figure 3-3 Connecting the adaptor to the computer
Getting Started
Power and Power-Up Modes
.
3-5