Satellite P30
HW Setup
This chapter explains how to use TOSHIBA HW Setup program to configure
your computer. TOSHIBA HW Setup lets you configure settings for General,
Display, Boot Priority, Keyboard, CPU, LAN, and USB.
Some models are not equipped with Parallel/Printer tab and/or CPU tab.
Accessing HW Setup
To run HW Setup, click Start, click Control Panel, click Printers and Other
Hardware and select TOSHIBA HW Setup.
HW Setup Window
Th HW Setup window contains the following tabs: General, Display, Boot
Priority, Keyboard, CPU, LAN, Device Config, Parallel/Printer and USB.
There are also these three buttons: OK, Cancel and Apply.
OK
Cancel
Apply
General
This window displays the BIOS version and contains two buttons: Default
and About.
Default
About
User's Manual
Chapter 7
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the HW
Setup window.
Return all HW Setup values to the factory settings.
Display the HW Setup version.
7-1