Operation; Hardware Description - Led State Table - Leadtek GPS 9537 User Manual

2. OPERATION

2.1. Hardware Description
The Bluetooth GPS has two LED light which each has two colors. One is GPS & Charge
status LED, that is named LED 2, and the other is Bluetooth & low power status LED, that is
named LED 1. The status table of LED shows as follows:
LED State Table
LED1
BT & Low Power LED
LED1 Color and Action
Blue Flash
Purple–Red Flash
LED2
GPS & Charge LED
LED2 Color and Action
Dark
Green Flash
Red
Orange-Red Flash
<Note1>When the Bluetooth is active and LED 1 lights, it shows Bluetooth RF function. As long
as the Bluetooth RF is transmitting the LED light will flash. When Bluetooth doesn't connect the
other Bluetooth device, the LED 1 will be flash periodically. Therefore, it means that it broadcasts
message to connect the other device with Bluetooth function. If it connects the other Bluetooth
device and transmits data, LED 1 will flash very quickly and look like bright.
<Note 2>When the battery is charging, LED 1 will show purple-red color and flash. The reason
that Bluetooth is working cause LED 1 purple-red color. If the GPS receiver go to the end of
Description
Bluetooth Active
Yes
Yes
Description
Battery Charged
No
No
Yes
Yes
- - 3
Low Power
No
Yes
Position Fixed
No
Yes
No
Yes