10.2 LAN Settings (Router Mode)
IP Address
IP Subnet Mask
WINS Server IP
Use Router As DHCP
Server
Starting IP Address
Ending IP Address
WINS Server IP
Accept / Cancel
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 6.1 for more information.
Specify LAN port IP address.
Specify LAN IP Subnet Mask.
Specify WINS Server IP.
Place a check to enable the DHCP server.
Specify DHCP server starting IP address.
Specify DHCP server ending IP address.
Specify the WINS Server IP address.
Press Accept to confirm the changes or Cancel to return
previous settings.