EnGenius ENH210 User Manual page 62

Connect on Demand
Keep Alive
Get Automatically
From ISP
Use These DNS Servers Select the Radio button for setup the Primary DNS and
Discard Ping on WAN
Accept / Cancel
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 6.1 for more information.
If the router's MTU is set too high, downstream packets will be fragmented. If
the router's MTU is set too low, the router will fragment packets unnecessarily and, in extreme
cases, may be unable to establish connections. In either case, network performance can suffer.
Select the Radio button to specify the maximum idle time. The
Internet will disconnect when it reaches the maximum idle time;
however, it will automatically connect when a client tries to access
the network.
Select the Radio button to keep internet connection always on.
Specify the redial period for once the Internet connection is lost.
Select the Radio button for the DNS servers to be obtained
automatically from the DHCP server.
Secondary DNS servers manually.
Place a check to Enable or Disable ping from WAN.
Press Accept to confirm the changes or Cancel to return
previous settings.