Freecom 45 User Manual page 61

Setup Procedure
1. Turn on the player and press "SETUP" on Mode Selection screen.
2. Move to 'TV Out' icon and press "ENTER". Setup box will be displayed under icon
menu.
3. Move to Video Output Mode that you want and press "ENTER".
4. Press "SETUP" again to save the configurations.
5.2.2 Audio Setup
This chapter shows you how to set up the audio output of the player. You can use Stereo
or Digital 5.1 ch.
Analog/DCPM: Select when you connect the supplied audio cables (Red /
White) to TV or Audio set directly.
Encoded Digital: Select when you want to listen through 5.1Ch / DTS Dolby
by connecting receiver (or amplifier) with Optical or Coaxial cable.
Use as Multimedia Player
EN
5
61