Freecom 45 User Manual page 34

Freecom MediaPlayer
Press "SETUP" on the remote control for moving to setup screen. Go to "Network".
EN
Select 'DHCP off' and write IP address & Subnet mask.
For example:

IP address: 192.168.1.2
Subnet mask: 255.255.255.0
After writing, press "SETUP" again for saving configurations.
If you have already been provided dynamic IP address from DHCP Server
or IP Router on your local area network, you don't need to write static IP
address absolutely. Use 'DHCP on' or write IP address & Subnet mask that
DHCP Server or IP Router provide.
Check 'IP address obtained automatically'.
When you use 'DHCP On', you can see the IP address in MENU screen after
selecting 'PC-Network' icon in Mode Selection screen.
4