Freecom MediaPlayer
4.5.2 Changing Read Only or Read / Write Mode
EN
Open your NDAS Utility by clicking on your Macintosh HD icon on your Desktop, double
click on your Applications Folder, then your Utilities folder.
4
Mount with Read Only Mode
•
Select the NDAS Device you want to mount.
•
Click on Unit Device.
•
Under Configuration select Mount Read Only.
•
The status will now show Mounted with Read Only.
Mount with Read / Write Mode
•
Select the NDAS Device you want to mount.
•
Click on Unit Device.
•
Under Configuration select Mount Read / Write.
•
The Status will now show Mounted with Read / Write.
Note: If no other user or application is using the Freecom MediaPlayer, the
status will change with the specified mounting command. If a user or ap-
plication is using the Freecom MediaPlayer, the status will not change.
Until both the Configuration and Status display the mount information is
the Freecom MediaPlayer in that state.
5