Toshiba IK-WB81A Quick Start Manual And Important Safeguards page 17

General Connection (without PoE)
1. Connect the Network Camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to the appropriate port of
the general I/O terminal.
(See page 11).
3. Connect the PC to an Ethernet switch via Ethernet cable.
1
NOTE
CAUTION
l Recommended power cord is twisted pair line with a minimum wire size of 18 AWG.
l When PoE is connected, don't supply AC24V or DC12V from the I/O
terminal.
l Never input AC24V and DC12V at the same time.
Ethernet switch
(not supplied)
2
AC24V or DC12V adapter
UL Listed Class 2 power supply (not supplied)
3
Client PC
(not supplied)
AC 120V
17