Setting The Rinse Aid Dosage; If It Does Not Come On, Start Over. 11 11; The Turbo Indicator Light Flashes 2 Times 14; The Time Display Shows The Flashing - Miele G 5280 Operating Instructions Manual

Before using for the first time

Setting the rinse aid dosage

The rinse aid dosage can be set at
levels between 0 and 6 ml. The factory
setting is 3 ml of rinse aid. This is just a
recommendation.
If the dishes appear spotty:
^ Use a higher setting.
If the dishes appear cloudy or streaky:
^ Use a lower setting.
18
^ Press the K button to turn the
dishwasher off.
^ Hold down the Program button and
simultaneously turn the dishwasher
on using the K button.
Keep the Program button pressed for
at least four seconds until the lower
right program indicator lights up.
If it does not come on, start over.
^ Press the Turbo button three times.
The Turbo indicator light flashes 3 times
at short intervals.

The time display shows the flashing

sequence p 3.
The set value is shown in the time
display after the P.
^ Select the desired dosage with the
Program button.
Every touch of the button increases
the level.
The setting is saved immediately.
^ Press the K button to turn the
dishwasher off.