Electrical Connection - Miele PW 6065 Plus Operating Instructions Manual

Installation

Electrical connection

This installation should be
performed by an experienced and
qualified technician, in accordance
with local codes and regulations.
The washer comes with a power cord
and NEMA L6-30 plug.
The machine is supplied as standard
for connection to a 208/240 V, 60 Hz,
30 A, 2-phase electrical supply.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
The machine must only be connected
to the voltage and frequency shown on
the data plate.
Do not install devices to
automatically turn the washer off,
i.e. a clock timer.
56