Before Using For The First Time - Miele PW 6065 Plus Operating Instructions Manual

The appliance must be correctly
installed and connected before the
first use. Please see the "Installation
instructions."
For safety reasons, it is not possible to
run a spin cycle before the first use. A
program must be run without laundry
and detergent to flush out any residual
water from the factory testing process.
Open the water supply.
Welcome screen
The Welcome screen shows when the
washer is turned on for the first time:
"Miele Professional Welcome".
The Welcome screen will not show
after the washer has been running for
more than 1 hour.
The display then shows the language
selection.
Language
Select the desired language and
confirm with "OK".

Before using for the first time

Shipping struts
The display reminds the user to remove
the shipping struts.
If the shipping struts were already
removed, confirm with the
button. Otherwise, remove them at
this time then confirm.
Set the time of day
Set the hour by turning the jog
shuttle, press to confirm.
Repeat to set the minutes and
confirm. Press again to save the time
of day.
First wash
Select the program "Cottons Uni."
and confirm.
The basic program "Cottons Uni."
shows.
Press the flashing button "Start".
The drum door must be closed.
Once the program ends the washer can
be used for laundry.
9