Hunter Type 5 Models Owner's Manual And Installation Manual page 15

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
8-8. First install the two GU24 CFL Bulbs into the sockets.
8-9. Thread the light and fan pull chains through the hole in the center
of the glass bowl. Then, thread the light pull chain through the hole
in the center of the cover plate.
8-10. Thread the fan pull chain through the grommet hole in the side of
the cover plate.
8-11. Place the finial cap up against the glass bowl. Align the holes in the
finial cap and glass bowl.
8-12. Thread the light pull chain through the finial and screw the finial
onto the threaded rod end until tight.
8-13. Attach the extra pull chains (included) to the light and fan
pull chains using the breakaway connector. (You may find the
breakaway connector on the end of the extra chain.)
Note: In compliance with US
federal energy regulations,
this ceiling fan contains
a device that restricts its
light output. Exceeding the
wattage limit marked on
the MAX wattage sticker
affixed to the light socket(s)
may result in fire hazard or
improper operation.
15
42216-01 • 05/02/12 • Hunter Fan Company
Breakaway
Connector
CFL Bulb
Metal Disc
Threaded Rod
Glass Bowl
Finial Cap
Finial