Placing Film Or Slides - Epson Perfection V700 Photo User Manual

Home > Placing Originals on the Scanner

Placing Film or Slides

Removing the Document Mat
Placing Film in the Holder
Placing Slides in the Holder
Placing Film in the Film Area Guide
Replacing the Document Mat
Removing the Document Mat
To scan film strips or slides, you need to remove the document mat from the scanner cover. This uncovers the
transparency unit so your scanner can use it to scan your film or slides.
Make sure the cover cable is connected to the scanner's OPTION port.
Note:
Before connecting or disconnecting the cover cable, turn off the scanner using its power button.
Open the scanner cover and gently slide up the document mat to remove it. Also make sure the transparency unit
transportation lock is unlocked.