Ii-3. Wi-Fi Access Point Mode - Edimax EW-7438RPn V2 User Manual

II-3. Wi-Fi Access Point Mode
1.
Connect the LAN port of your EW-7438RPn to the LAN port of your
existing router using an Ethernet cable, and then click "Next".
2.
Click "Next" to continue.
3.
Select "Obtain an IP address automatically" or "Use the following IP
address" for your EW-7438RPn. If you are using a static IP, enter the IP
address, subnet mask and default gateway. Click "Next" to proceed to the
next step.
"Obtain an IP address automatically" is the recommended setting
for most users. For more guidance on static IP addresses, please
refer to VII-1. Configuring your IP address.
15