Iv-3-1-4. Pptp/L2Tp - Edimax BR-6478AC User Manual

DNS address
DNS1
DNS2
DNS3
TTL
Service Name
MTU
Connection Type
Idle Time Out
Enable Dual Wan Access
If your ISP provides a dual-WAN service, then check the box "Enable Dual Wan
Access" and enter the required information.
IV-3-1-4. PPTP/L2TP
Fields for PPTP and L2TP connections are the same – PPTP is used as an
example below.
Select "Obtain an IP address automatically" or "Use the
following IP address". If you choose "Use the following
IP address", you will need to complete the "DNS1
Address", "DNS2 Address" and "DNS3 Address" fields
below.
Input the address of DNS1 assigned by your ISP.
Input the address of DNS2 assigned by your ISP.
Input the address of DNS3 assigned by your ISP.
Enable the "TTL" function if your ISP requires you to do
so.
Input the Service Name assigned by your ISP.
Input the MTU (maximum transmission unit) value of
your network connection. The default value is 1392.
Typical values for ADSL are 1392 or 1492.
Select connection type from:
"Continuous" – always connected.
"Connect on Demand" – connect when required.
"Manual" – connect and disconnect manually.
For "Connect on Demand" connection type, specify the
length of inactivity required to disconnect.
34