Cubasis Audio System Setup Settings; E-Mu Asio Control Panel Settings - E-Mu 404 Owner's Manual

6 - Working with ASIO
Basic Recording
Select the Audio Files Folder
Choose the location where your audio files will be stored. It's usually a good idea to do
this step first as if you were, "Putting the tape reels on your recorder."
Go to Options, Audio Setup, Audio Files Folder.
9.
Choose any location that you will be able to find later. A fast, "non-boot" drive is
10.
usually preferable for recording audio files.
Setup Cubasis Audio & ASIO Settings
Set the Audio System Settings and ASIO Settings as shown below.
11.

Cubasis Audio System Setup Settings

(Options, Audio Setup, Audio System Setup...)
The dialog box above shows the correct settings for 44.1 kHz.

E-MU ASIO Control Panel Settings

Click the ASIO Control Panel button to set the ASIO Buffer Latency.
ASIO Buffer Latency should be set to 5 milliseconds or less, depending on the speed
12.
of your computer's CPU. This controls adjusts the amount of delay incurred trans-
ferring audio between the Digital Audio System hardware and Cubasis.
Turn Enable Monitor on. This is located under Options, Audio Setup.
13.
56 Creative Professional