E-Mu 404 Owner's Manual page 62

6 - Working with ASIO
IMPORTANT -> Activating ASIO
To Set Up a Mono Recording Session:
To record each input as a mono track, you just place an ASIO Send into each channel's
Insert Section. Because ASIO is stereo, the mono inputs will be duplicated on both of
the ASIO pair. The PatchMix DSP Session Template 44.1 Mono-Stereo Session is
already set up for you. Open this Template and use it for either mono or stereo
recordings. Here's how the template works for Mono:
Create Pre-Fader PatchMix strips for the PCI Card In L and PCI Card In R.
1.
Place an Insert Send (Output to ASIO) into the left and right strip.
2.
(ASIO 1/2 - HOST, & ASIO 3/4 - HOST are used in the factory template.)
Panning doesn't matter in this example since the panning network comes after the
3.
Insert section.
Mute the Faders on the two strips because you will monitor the inputs through
4.
Cubasis.
Mono-Stereo Session Template
54 Creative Professional