Open Session; Save Session; Session Settings; System Settings - E-Mu 404 Owner's Manual

You can now create either a blank new session or you can create a session based on a
factory template. The factory templates are pre-programmed with specific setups such as
audio recording or mixing. The selector tabs categorize Template Sessions into two
groups based on sample rate, 44.1kHz/48kHz or 96kHz.
You can create your own templates by simply copying or saving sessions into the
"Session Templates" folder (located in the PatchMix DSP folder on your hard disk).
The "Session Path" allows you to choose the destination for your Session. The default
location is in the "My Sessions" folder within the PatchMix DSP folder.
There is also a Comment area that you can use to give yourself some clue as to what you
were thinking when you created the session.

Open Session

To Open a saved session, click on the Open Session button. A dialog box appears
allowing you to choose one of your saved Sessions to open. Choose one of your saved
sessions and click on the Open button.

Save Session

To Save a session, click on the Save Session button. A Save dialog box appears allowing
you to choose a location in which to save the current Session. The "My Sessions" folder
is chosen by default.
Get in the habit of saving the session whenever you have created a special mixer setup.
This will make you life much easier as you can recall a setup for many different audio
modes such as: recording, mixing, special ASIO routings, etc.

Session Settings

System Settings

Pressing the Session Settings button on the toolbar brings up the System Settings
window shown below. Click the tabs to select System or I/O options.
E-MU Digital Audio System
4 - The PatchMix DSP Mixer
The Session
Saving a session
f
"defragments" the effect/
DSP resources. If you
have used all your effects
and need another, try
saving the session.
13