The Insert Menu - E-Mu 404 Owner's Manual

4 - The PatchMix DSP Mixer
Mixer Strip Creation

The Insert Menu

Right-Clicking over the insert section brings up a pop-
up selection box containing various insert options.
To Add a Send Insert:
This type of insert send splits the signal at the insert
point and sends it out to the selected destination.
Right-Click over the Insert section. A pop-up
1.
dialog box appears.
Select "Insert Send (to ASIO or other)" from the
2.
list of options. The following dialog box appears.
Choose one of the Send Outputs. Click on a destination to select it.
3.
Click OK to select the output or Cancel to cancel the operation.
4.
To Add a Send/Return Insert:
This type of insert send breaks the signal at the insert point and sends it out to the
selected destination such as an external effect processor. A return source signal is also
selected which returns the signal to the channel strip after processing.
Right-Click over the Insert section. A pop-up dialog box appears.
1.
Select "Insert Send/Return" from the list of options. The following dialog box
2.
appears.
Choose one of the Send Outputs. Click on a destination to select it.
3.
Choose one of the Return Inputs. Click on a source to select it.
4.
Click OK to select the Send and Return or Cancel to cancel the operation.
5.
18
Input
Insert
Send
Panning
Fader
Aux 1 Bus
Aux 2 Bus
Main Output Bus
Input
Insert
Send/Return
Panning
Fader
Aux 1 Bus
Aux 2 Bus
Main Output Bus
To ASIO, WAV or
Physical Output
To Physical Output
From Physical Input
Creative Professional