Installing The Unit - Kenwood DDX749WBT Instruction Manual

Installing the Unit

Installation on Toyota Car using Brackets
A
ccessory 3 (M5x6mm)
Installing the Microphone Unit
1
Check the installation position of the
microphone (accessory 4).
2
Remove oil and other dirt from the
installation surface.
3
Install the microphone.
4
Wire the microphone cable up to the unit
with it secured at several positions using
tape or the like.
⁄
•
Install the microphone as far as possible from the
cell-phone.
Accessory 4
F
ix a cable with a commercial item of tape.
70
DDX749WBT
C
ar Bracket
A
ccessory 3 (M5x6mm)
P
eel the release coated paper of double-face
adhesive tape to fix on the place shown above.
A
djust the direction of the microphone to the driver.