JVC Black Sapphire SL42B-C User Manual page 17

Install Batteries Into Remote Control
Setting Up The TV
To open the battery compartment,
press down on top end of cover and
then slide cover down.
Insert two AAA batteries into battery
compartment. Observe correct
polarity.
Insert cover and slide up into place.
Battery Precautions:
Be sure to follow the correct polarity. Incorrect installation may cause battery
leakage or damage to the remote control.
Always replace batteries in pairs; never combine a used battery with a new one.
Do not use different battery types together (e.g. Alkaline and Carbon-zinc).
If remote control will not be used for an extended period of time, remove
batteries to prevent battery leakage.