JVC Black Sapphire SL42B-C User Manual page 16

1 Turn off your TV and disconnect all cables.
2 Carefully place the TV face down on a flat, clean, and
padded surface. If available, put TV cover or protective
sheet onto the TV before laying the TV down on flat
surface.
3 Using a cross-tip screwdriver, remove four screws securing
TV stand to rear of TV. Remove TV stand.
4 Follow instructions in wall mount kit and install wall
mount. Install TV onto wall mount in accordance with
wall mount kit instructions.
NOTE: Wall mount screw hole pattern on rear of this model is VESA
400 x 400mm, with M6 screws
Setting Up The TV